Dayton Ultimax 18 Vs Svs

The ultimax series of dual voice coil subwoofers, from dayton audio, are not for the faint of heart. My 2 ultimax 15's are now.

Dayton Audio 18" Ultimax Subwoofer Driver / GSG Audio DIY

These are powered with an inuke 3000 to each giving them about 2,000 watts each.

Dayton ultimax 18 vs svs. I would recommend a 500 watt or 1000 watt amp for the 15 ultimax, but even with the 300 watt the ultimax would likely provide slightly greater output than the pb. However, above and below that range, it. Like the rest of the ultimax series, the.

Hi, long time viewer, first time posting. Next attempt was two dayton um18's in a full marty ported box (tuned to 18hz i believe). Truly not for the faint of heart!

I'm running an ultimax 18 with a 3000w amp (behringer nx3000d) and it's just right. The bash amps require soldering for a bass boost, but the dayton 500 watt amp has knobs for a bass boost. Ib should be a consideration is this is a fresh build and you can do a little diy work.

The 18 ultimax models slightly better that the si and with have a few more db's. Add another $100+ in other materials (posts, glue, polyfill etc),. Pretty good performance to 20hz for the price.

Svs 12" vs hsu 12" / 15" vs the dayton ultra max 18". Gonna put together a couple of sealed 18's and run them using my spare behringer amps. Even with a beast of an amp, the ultimax doesn't have an advantage from, say 16 hz to 31 hz against the ported hsu 15 subs.

I can get a dayton ultimax 15 or 18 and power it with an 830wt power amp. Another diy option which gives you the ability to get two ported 18's for $500 or less and play at quite high levels is the vbss subs. The svs would obviously look better, as i'm not going to any great lengths to finish the ultimax build like veneer or whatnot.

In the country i am located it will set me back by roughly 600$ for driver. I have two and they are pretty remarkable for the money. Dayton audio ultimax dvc subwoofers seep a higher volume of air while preventing false, deceptive reproduction.

The 18 and 15 ultimax diy build kits are basically unbeatable for price if you're willing to put in the work. Granted, i have the two voice coils wired in series for 8 ohms impedance. I think a 500w amp would be underpowered for the ultimax in a large room, even if you wired the voice coils in parallel.

Unless you consider used gear. 2 ultimax 18 sealed vs svs sb16 ultra. Svs 12" vs hsu 12" / 15" vs the dayton ultra max 18".

Hi ht lords, am about to pull the trigger on getting the dayton ultimax 18 with flatpack kit and an inuke 6000 amp. There are several ways to get room shaking bass, one way is extension below 15 hz and the other is 15 hz and above. I have also used the um18 in the 4 cft flat pack and also in a marty cube.

The latter really isn't an option. And by the way the dayton 500 and 1000w amps are exactly the same size last time i checked. It is addictive though, i have already sold the svs and about to sell both dayton 18's to build dual devastators.

(the other) colin miller, kaelaria, wvu80 and 1 other person. Sealed 18 diy's, svs, or shut up and quit whining? Built using the latest in subwoofer technology, ultimax subwoofers are the pinnacle of low frequency driver design.

3 x xtz m8 2 x xtz s5 2 x svs sb13 dayton audio 18 sub with svs bash amp. Add to it the cost of amplifier that would be approx another 600$ for a crown dsi 2000. Keep in mind that the dayton 500 and 1000w amps take up a good amount of volume, if you can find a smaller amp that would help.

I have the mdf to make an enclosure myself. Comparable commercial sub to ultimax 18 diy. An ultimax subwoofer tests the.

Total comes to around $425+$350=$775. These shake the entire house with test tones.

Dayton Audio UM1822 18" Ultimax DVC Subwoofer 2 ohms Per